Agilent Technologies N2610A - Manual (Page 84)

76 Agilent FrameScope 350 User’s Manual
3 Cable Testing with the FrameScope 350
Setting Up an Autotest
Entering the Operator Names
The names of the technicians performing the tests can be
entered, and will appear on the test report.
To enter the test technicians’ names:
1 On the Main Menu, press System. The System Settings screen
displays.
2 Press Operators, then press Edit. The Operator Setup screen
displays.
3 Choose the FrameScope unit’s testing location, either Telecom
Room
, Outlet, or Other.
4 Press the FrameScope Operator field. The onscreen keyboard
opens, with “FrameScope Operator” at the top or a list of previously