Testing overview – Agilent Technologies N2610A User Manual
Page 125
Cable Testing in Expert Mode
5
Testing Overview
Agilent FrameScope 350 User’s Manual
117
Testing Overview
This section provides an overview of cable testing in Expert
Mode. For additional information on cable testing, see
“Cable
Testing Background”
on page 57.
Expert Mode uses the same two-tester method as regular cable
testing, employing a FrameScope 350 at one end and a
DualRemote 350 at the other.
The following steps describe the general procedure for
performing Expert Mode cable certification testing.
1
Calibrate the FrameScope and DualRemote testers that you
will be using. See
“Calibrating the Tester”
on page 61.
2
Choose a link or channel test configuration to meet your
application. See
“Choosing Your Test Configuration”
on
page 57.
3
Switch on the FrameScope and DualRemote testers and
connect them to the cabling to be tested. See
“Connecting to
the Network”
on page 12.
4
Put the FrameScope 350 into Expert Mode. See
“Changing to
Expert Mode”
on page 118.
5
Run an AutoTest on the network. See
page 119
.
6
Create a new settings profile (see
page 121
) or open an
existing settings profile (see
page 119
).
FrameScope
DualRemote
Telecommunications
Closet
User Location
Outlet
Structured Cabling Link