Printer setup – Agilent Technologies N2610A User Manual
Page 177
System Operations
7
Printer Setup
Agilent FrameScope 350 User’s Manual
169
Printer Setup
The FrameScope 350 can print labels directly to a Brady TLS2200 label
printer. The labeling parameters are set using the procedure
“Choosing
the Labeling Format”
on page 64. When the FrameScope is configured as
described in the following procedure, a label for the tested cable will be
printed after saving a test result.
To configure the FrameScope 350 to print to the Brady label printer:
1
On the Main Menu, press System. The System Settings screen
displays.
2
On the System Settings screen, press Autoprint, then Edit. The
Printer Setup screen displays.
3
Press Autoprint to enable the Autoprint function. A checkmark
shows that the function is enabled.
4
Connect the N2605A-050 interface cable to the serial ports of the
FrameScope 350 and Brady TLS2200.
5
Turn the Brady printer on.
6
Press the Func and Exit keys on the printer simultaneously. This
sets the printer to Peripheral mode.