Agilent Technologies N2610A - Manual (Page 43)

Network Testing with the FrameScope 350 2
Performing SNMP Queries
Agilent FrameScope 350 User’s Manual 35
2 Press the SNMP Queries button to call the SNMP Query
screen.
3 Enter the device to which you want to query in the Target
box. You can enter the device name or address.
4 The SNMP Settings button allows you to add SNMP
communities and ports to the default “public” community
and default port 161 or to change those set up for auto
discovery.
5 Press the Start button to begin the SNMP Query test.
The SNMP Queries Results screen will be displayed.