Agilent Technologies N2610A - Manual (Page 216)

208 Agilent FrameScope 350 User’s Manual
8 Network Performance Analyzer Reference
Network Tools
Destination MAC To send a frame to a station on the local LAN,
enter its MAC address. If the destination address is set to
FF-FF-FF-FF-FF-FF, the frame will be received by all devices on
the LAN. To send a frame across a router, the router’s MAC
address should be used.
Source IP or IPX Source network address, if required. If Source
MAC is set to simulate multiple stations, then the Source IP is
incremented along with the MAC. For instance, if the
FrameScope is set up to generate Ethernet/IP frames from
multiple simulated stations with IP Address set to
209.6.108.202, then the first two frames would be addressed as
follows:
Destination IP or IPX Destination network address, if required.
Frame Number MAC Address IP Address
1 00-0C-65-01-00-01 209.6.108.202
2 00-0C-65-01-00-02 209.6.108.203