Agilent Technologies N2610A - Manual (Page 145)

Cable Testing in Expert Mode 5
The Expert Tools Menu
Agilent FrameScope 350 User’s Manual 137
You can save and view details of the test results as with any test
by pressing Details. See Saving Test Results, on page 5-3, and
“Viewing Result Details” on page 5.
Blinking the Port
To locate the switch or hub a cable is connected to, the
FrameScope 350 can blink the switch or hub port. The
technician using the FrameScope at the wall plate end of the
circuit blinks the indicator on the panel at the hub or switch
end.
To blink the port:
1 On the Tools menu (see page -134), press Blink Port. The Blink Port
screen displays.
2 Press Start. The port begins blinking, and the Start button changes
to a Stop button.