Agilent Technologies N2610A User Manual
Page 73
Advertising
Cable Testing with the FrameScope 350
3
Setting Up an Autotest
Agilent FrameScope 350 User’s Manual
65
1
On the Site Setup screen, press the preferred labeling format, then
press Next.
Simple Label Format
When you choose the Simple labeling format, the following
screen displays:
To configure the simple labeling format:
1
If you want the numbers on the labels to increase automatically with
each new label and test, press Enable Auto-Increment so that a
checkmark appears, as in the figure above.
Advertising