Agilent Technologies N2610A - Manual (Page 77)

Cable Testing with the FrameScope 350 3
Setting Up an Autotest
Agilent FrameScope 350 User’s Manual 69
5 To set the number of instances of a category (for example, the
number of floors), press the Enter End Value field. The onscreen
keyboard opens.
6 Press the backspace arrow to erase the value in the display, then
press the number or letter keys to enter the new value. Press OK. The
keyboard closes, and the new ending value appears in the Enter End
Value
field.
7 Repeat steps 2 through 6 for all the selected categories.
8 Press OK. The Autotest Setup screen displays.
Hierarchical Label Format
When you choose the Hierarchical labeling format, the following
screen displays: