Agilent Technologies N2610A - Manual (Page 195)

Network Performance Analyzer Reference 8
Network Performance Autotest
Agilent FrameScope 350 User’s Manual 187
Another way to add a test to the suite is to press the Create
New radio button and press Next.
1 A list of test types is presented on the next screen.
2 Select the type of test and press Next.
3 Test specific parameters may be edited on the next screens
as discussed below under each test heading.
DHCP Server
The DHCP Server test verifies that the DHCP server responds to
a request for an IP address and other optional items. If any
optional information is requested, the server response would be
checked for all of the requested information.
Setup
The IP address of the DHCP Server to test is entered on the first
DHCP Server test setup screen. All DHCP responses received
during this test are compared against this address to verify that
responses are being received from this server. The next setup
screen is used to specify which optional items should be