Changing to expert mode – Agilent Technologies N2610A User Manual
Page 155
Advertising
Expert Fiber Testing
6
Changing to Expert Mode
Agilent FrameScope 350 User’s Manual
147
Changing to Expert Mode
To change the FrameScope tester from standard configuration
to Expert Mode:
1
On the Fiber Main menu, press System. The System Settings screen
displays.
2
On the System Settings screen, press User Interface, then press
Edit
. The User Interface Setup screen displays.
On the User Interface Setup screen, press Expert Mode to turn
it on, then press OK. The System Settings screen displays.
Advertising