Agilent Technologies N2610A - Manual (Page 218)

210 Agilent FrameScope 350 User’s Manual
8 Network Performance Analyzer Reference
Memory Requirements
Memory Requirements
The FrameScope 350 requires a CompactFlash™ card to store test
results and network station lists. The amount of memory that each
Autotest result takes up depends on the number of test and the number
of iterations that you set before starting the test. The results require
about 600 bytes per test plus 150 bytes per iteration for each test. There
is a limit of 100 tests and a limit of 100 iterations. Therefore, the
maximum results size is about 1.5 MB.
The Autotest suite storage requirement is only 350 bytes per
test, so the maximum size is about 35 KB.
The station list storage requirement is 250 bytes per station
with a maximum of about 1500 stations, so the maximum size is
375 KB
The FrameScope 350 does not use any of the 4MB of internal Flash
memory for network test result storage. The cable test results can be
stored in the internal Flash memory.
The following table lists approximate record storage capacities when
configured for a 32 MB removable CompactFlash™ card and for
comparison, a 192 MB card. All sizes of CompactFlash™ will work as
FrameScope 350 Network Autotest results storage.
Th‰rqÃUr†‡ÃSr†ˆy‡†Ã8hƒhpv‡vr†Ãh††ˆ€vtÃhà ГH7Гˆ†rqÃs‚ Çr†‡Ã†ˆv‡r†ÃhqƇh‡v‚Ãyv†‡†
6ˆ‡‚‡r†‡ÃÆ D‡r h‡v‚†
Tv“rÂsÃ
rp‚ q
8hƒhpv‡’ГЖГ‚sÃSrp‚ q†
"!ГH7ГГГ
8Ayh†uÃ
8h q
(!ГH7Г
8Ayh†uÃ
8h q
Ã6ˆ‡‚‡r†‡† %ГF7 $ % " '"
Г6ˆ‡‚‡r†‡†  $%ГF7 (' !!#
Г6ˆ‡‚‡r†‡† %ГF7 $ " '
Г6ˆ‡‚‡r†‡†  $%ГH7 ( !!