Agilent Technologies N2610A - Manual (Page 131)

Cable Testing in Expert Mode 5
The Expert Autotest Setup
Agilent FrameScope 350 User’s Manual 123
Password Screen, where you can choose to password protect your
profile.
5 If you choose to password protect your profile, you will be prompted
to enter the password. Once you are satisfied with your password
selection, press OK to return to the Autotest Settings screen, where
the locks will be shown. If it is password protected, you will now be
prompted to enter the password in order to modify this profile.
Setting the Test Limit
The Expert Mode allows you to set the test limit according to
several standards. To set the test limit to a certain standard:
1 In Expert Mode, press Autotest on the Main menu.
2 On the Autotest Setup screen press Edit Settings. On the Autotest
Settings screen press the icon second from the top of the list that
looks like a page with a number or letter superimposed on it.