Agilent Technologies N2610A - Manual (Page 229)

DualRemote 350 Reference 10
The DualRemote 350
Agilent FrameScope 350 User’s Manual 221
Indicators
Pair Status Indicators
The pair status indicators turn green or red at the end of a test to show
the status of each pair. A red indicator means the associated pair failed
the current test.
Warning Indicators
The warning indicators denote conditions that might prevent or impair
testing.
Hub/NIC Detected: The Hub/NIC Detected indicator means the
DualRemote 350 is connected to a hub/Switch port or NIC port, instead
of to a port connected to the FrameScope 350.
[This function is not yet
supported.]
Voltage Warning: The voltage warning indicator means the
DualRemote 350 is connected to a line which has a potentially damaging
voltage present. This condition usually occurs when attempting to test a
line that is connected to a telephone switch.
8hˆ‡v‚) DsГ’‚ˆГ†rrГ‡uv†Ãvqvph‡‚ Ãv€€rqvh‡ry’Ãqv†p‚rp‡Ã‡urÃ9ˆhySr€‚‡rГs ‚€Г‡urÃyvrÃ
Ahvyˆ rǂÃqv†p‚rp‡Ã‡urÃyvrÃphÃƒr €hr‡y’Ãqh€htrÇurÃ9ˆhySr€‚‡rÃ"$
Calibration Required: The Calibration Required indicator means the
DualRemote 350 is not calibrated to the FrameScope 350. The autotest
will not execute until the calibration is done.
Battery: The battery indicator shows the current state of the
DualRemote 350 battery charge.
When an external charger is supplying power to the DualRemote:
• The Battery indicator is steady green when the battery is charging.
• The Battery indicator flashes green when the battery is fully
charged.
When no external charger is connected to the DualRemote:
• The Battery indicator is dark when the battery is operating
normally.
• The Battery indicator is red when the battery charge is low.
8hˆ‡v‚) V†ry’Çurà !WÃpuh tr hqhƒ‡r ƈƒƒyvrqÐv‡u҂ˆ ÃA h€rTp‚ƒrÃhqÃ9ˆhySr€‚‡rÃ
V†vtГh’Г‚‡ur Ãpuh tr hqhƒ‡r ÃphÃqh€htr҂ˆ ÃA h€rTp‚ƒrÃr„ˆvƒ€r‡ÃhqɂvqГ
’‚ˆ Гh h‡’
Test Progress and Result Indicators
Progress: The Progress indicators show approximately how much of
the current test is complete 1/3, 2/3, and complete.