Agilent Technologies N2610A - Manual (Page 119)

Fiber Testing 4
Setting Up an Autotest
Agilent FrameScope 350 User’s Manual 111
1 On the Fiber Autotest Settings screen, press the connector icon, then
Edit
. The Connector Setup screen displays.
2 Press Next. A list of that connector types displays.
3 Press the type of the connector, then press OK. The Fiber Autotest
Setup screen displays, with the selected connector type next to the
connector icon. If you do not see the connector on the list, see the
next section.
Adding a new connector type
If you have a connector which is not in the connector database,
you can add a new connector description to the database.
1 If the manufacturer is not present, leave the manufacturer as
Unspecified. If the manufacturer is present in the list, select
it, then press Next. The next Connector Setup screen is
displayed. In either case you will be offered stored