Choosing the labeling format – Agilent Technologies N2610A User Manual
Page 115
Advertising
Fiber Testing
4
Setting Up an Autotest
Agilent FrameScope 350 User’s Manual
107
1
On the Fiber Autotest Settings screen, press Site, then press Edit.
The Site Setup screen displays.
2
Select Create a New Site Name, then press Next. (The OK button
changes to a Next button when you select Create a New Site
Name
.) The screen changes, to allow naming the site.
3
Press the Enter New Site Name field
The onscreen keyboard opens.
4
Press the keyboard keys to enter the site name, then press OK. The
keyboard closes.
Choosing the Labeling Format
The labeling format for fiber is the same as that for copper. See
“Choosing the Labeling Format”
on page 64 for more
information.
Advertising