Spectra Precision Survey Pro CE v3.60 GPS User Manual - Manual (Page 112)

Job Menu
17
Rover Radio Settings
-RE 6HWWLQJV 5HFHLYHU 5HFHLYHU 6HWWLQJV« 5RYHU 5DGLR
The Rover Radio Settings card is used to view
and configure the settings for the radio used
with the rover receiver. It is identical to the
Base Radio card described on Page R-14.
General Settings
-RE 6HWWLQJV 5HFHLYHU 5HFHLYHU 6HWWLQJV« *HQHUDO
The General Settings card is used to configure
additional settings and to select any receiver-
specific settings.
Elevation Cutoff : is where you set the
minimum elevation angle for using a satellite.
The available fields on this page are specific to
the selected receiver make and model. For
further information, see your receiver
documentation.
6HW 5[ 7R 2)) PRGH: Disables all RTK
operation (base and rover) and puts the
receiver into a standalone autonomous position mode.
Note: This function is useful for some receivers that have trouble
communicating with radios during RTK operation.