Sky view, Sat info – Spectra Precision Survey Pro CE v3.60 GPS User Manual User Manual

Page 117

Advertising
background image

GPS Reference Manual

22

consistently greater than one second, check the radio link.

Reception

: displays the receiver’s estimation of the percent quality of

the radio link.

Position

Quality

: (see the Receiver card on Page R-20.)

Sky View

The Sky View card displays a plot of the satellites
tracked and the elevation mask boundary.

Note: If the receiver setup has not yet been
performed, the elevation mask will not be
displayed.

Sat Info

The Sat Info card displays signal quality information for the satellites
that are being used and allows you to disable
specific satellites.

USI

: is the satellite identification number that

you wish to disable or re-enable.

'LVDEOH 69 : disables the USI entered above.

This satellite will then no longer be used in any
solution until it is re-enabled.

(QDEOH 69 : re-enables the USI entered above.

(QDEOH $// : enable all the satellites that were disabled.

615 3ORW : This card lists all the satellites that are in view and

shows a bar graph that indicates the signal-to-noise ratio. A longer
bar indicates more noise, and a lower-quality signal.

69 /LVW : This card lists signal quality information for each satellite

being used, which is reported by the receiver. The columns
available depend on the receiver being used. Consult your
receiver’s documentation for more information.

Advertising