Spectra Precision Survey Pro CE v3.60 GPS User Manual - Manual (Page 163)

GPS Reference Manual
68
GPS Status
6XUYH\ *36 6WDWXV 
The GPS Status screen contains most of the same index card-format
screens as the RTK Status case. When in Post Processing mode, the
Post Process card replaces the Data Link card.
Post Process

The Post Process card displays information about data recording on
the receiver and information about the session in progress.
Note: Some GPS receivers monitor post processing session status
while others simply record event markers in the raw data file. If your
receiver does not monitor sessions, some fields are not displayed.
Status : displays information about the
recording. It will be one of the following values
•
No Communication : we are not
receiving a response to commands.
•
No Data : we are receiving an unknown
or a bad response to commands.
•
Recording : the receiver internal
memory is recording GPS raw data. If
this receiver monitors sessions, this
field will display
: session in progress
when a session is ongoing.
•
Not Recording: the receiver internal memory is not recording
raw data.
Site ID : displays the Site ID of the current session if a session is in
progress. If your receiver does not monitor sessions, the Site ID is the
last Site ID sent by Survey Pro.
Interval : displays the current recording interval set in the receiver