Spectra Precision Survey Pro CE v3.60 GPS User Manual - Manual (Page 179)

GPS Reference Manual
84
Show Station and Offset
6WDNHRXW 6KRZ 6WDWLRQ 
The Show Station and Offset routine allows you to position the rover
anywhere near a polyline, a range of points that define a line, or an
alignment to see where the rod is located in relation to the selected
line.
The first screen of this routine is similar to the conventional method,
except that the
%DFNVLJKW button is replaced with a 6HWXS +5 button
to configure rover antenna and the backsight information is replaced
with rover antenna height information. See the conventional
Reference Manual for details.
Show Station – Screen Two
Once the line is selected, the second screen is opened where
information is displayed about the rod position and the selected line.
GPS Status : displays the current solution
type, the number of satellites used, and the
horizontal and vertical precision computed by
the receiver. Tap on this button to open the
detailed GPS Status screens (Page R-20).
5 Hz Mode : switches the receiver from one
Hz to five Hz mode. When this box is
checked, the receiver will compute positions
five times a second so the display will update
in near real time while you are roving to the
point.
2&&83<,1* / 529,1* : switches from
ROVING to OCCUPYING
mode. When ROVING, the receiver is in dynamic mode and will
calculate your position as you move to the point. When
OCCUPYING,
the receiver is switched to static mode (depending on settings) and
will calculate the most precise position for the staked point.