Spectra Precision Survey Pro CE v3.60 GPS User Manual - Manual (Page 174)

Stakeout Menu
79
6WRUH : prompts you for a point name and description and stores a
point for the current location.
Note: When Store GPS Raw Data on the Job/ Settings/ Measure Mode
card (Page R-8) is set to + BL,CV and/or + Rx. Raw tapping
6WRUH
without first switching from ROVING to OCCUPYING will store the
point in Survey Pro only; no base line measurement or receiver
session will take place.
Slope Staking
6WDNHRXW 6ORSH 6WDNLQJ 
The Slope Staking screen is used to locate the catch points for a
roadway in any terrain.
The first three and the last screens of this routine are similar to the
conventional method, except that the
%DFNVLJKW button is replaced
with a
6HWXS +5 button to configure rover antenna and the backsight
information is replaced with rover antenna height information. See
the conventional Reference Manual for details.
Once the centerline of the road is selected and the road profile is
defined, the fourth Slope Staking screen is used to locate the stake
point at the current station.
Slope Staking – Screen Four
The graphic portion of the Horizontal Map and Vertical Map is updated
continuously. This allows the user at the rover position to watch the
movement of the rover in relation to the slope and easily position the
rod over the catch point.
Note: You can tap in the graphic portion of the screen to open the
graphic in a larger window.