Spectra Precision Survey Pro CE v3.60 GPS User Manual - Manual (Page 44)

GPS User’s Manual
40
Manual Entry of Parameters
Manual entry of parameters is used when you already know the
appropriate horizontal and vertical localization parameters for a site.
Use manual entry of parameters to key in the site parameters and set
it as the current projection record.
If you already know the scale, rotation, translation, and origin for a
horizontal site, or if you know the slope, shift and origin of a vertical
site, you can manually set the localization parameters.
1. After receiver setup, go to Projection from the Survey menu.
2. Tap
6ROYH /RFDOL]DWLRQ to open the Solve Localization wizard and
then tap
0DQXDO (QWU\!.
3. Enter the Scale , Rotation , Translations , and Origin of the
horizontal system.
4. Enter the Slope N , Slope E , Separation , and Origin of the vertical
adjustment.
5. Tap
6ROYH! to show the horizontal and vertical parameters
entered.
6. Review the results and tap
$FFHSW when you are done.