Spectra Precision Survey Pro CE v3.60 GPS User Manual - Manual (Page 113)

GPS Reference Manual
18
RTK Configurations
-RE 6HWWLQJV 5HFHLYHU 5HFHLYHU 6HWWLQJV« 57. &RQILJ
The RTK Configurations Settings card is used to configure automatic
connection when RTK base and rover receivers need to use different
COM ports and settings.
Auto connect RTK with saved configuration :
is where you turn on the automatic connection
function. When selected, this feature will
switch to the receiver brand and model and set
the port settings to the saved configuration.
Base : Displays the brand and model of the
saved base receiver configuration.
Connect Using : Displays the COM port
settings for the saved base receiver
configuration.
6DYH FXUUHQW UHFHLYHU DV 57. %DVH Saves the current receiver and
COM port settings as the RTK base. This receiver will automatically
be set when you tap Base Setup in Survey Pro.
Rover : Displays the brand and model of the saved rover receiver
configuration.
6DYH FXUUHQW UHFHLYHU DV 57. 5RYHU Saves the current receiver and
COM port settings as the RTK rover. This receiver will automatically
be set when you tap Rover Setup in Survey Pro.
Note: If you need to connect to a receiver different than the saved
configuration, you can un-check the Auto Connect control.