Spectra Precision Survey Pro CE v3.60 GPS User Manual - Manual (Page 52)

GPS User’s Manual
48
6. Examine the results. The Rotation is the negative of meridian
convergence between the central meridian of the selected map
projection zone and the base point.
7. If you set your base up on a known point, then the base station
coordinates are already entered into the Base Station Local
Coordinate fields. Tap
6ROYH! to calculate the localization
parameters. Tap
$FFHSW to finish setup and return to the
Projection screen.
8. If you set your base up on a new point, you need to tap
2FFXS\ &RQWURO. You will be prompted to make sure your
Scale
and Rotation are correct before the Control Points screen is
opened. You need to select and occupy a single control point.
When you are done, tap
$FFHSW to return to the Solve Localization
screen and the calculated coordinates are returned to the North
and East fields.
9. Tap
6ROYH!. Examine the results and tap $FFHSW when you are
done. You will be prompted to name the new localization site and
save the record in the database.