Spectra Precision Survey Pro CE v3.60 GPS User Manual - Manual (Page 172)

Stakeout Menu
77
Stake to Line – Screen Two
The second screen is where measurements take
place and the staking directions are displayed.
The graphic and display direct you to points on
line via the shortest route, a perpendicular
offset from the rover to the line.
The graphic display will change depending on
how close you are to the specified line. The
chart below illustrates each screen type.
Note: Tap the graphic portion of the screen for an expanded view.
GPS Status : displays the current solution type, the number of
satellites used, and the horizontal and vertical precision computed by
the receiver. If this area of the screen is tapped, the epoch count stops
and the GPS Status screen opens (Page R-20).
Go SOUTH / NORTH : displays the distance the rover must move in a
south or north direction to reach the closest point on the line.
Go EAST / WEST : displays the distance the rover must move in an
east or west direction to reach the closest point on the line.
Rover is greater than
3 m (10 ft) from the
line. Rover is between 0.3
and 3 m (1 and 10 ft)
from the line. Rover is within 0.3 m
(1 ft) of the line Rover is on the line or
within the Horizontal
Distance Tolerance
specified in the
Stakeout Settings
screen.