Spectra Precision Survey Pro CE v3.60 GPS User Manual - Manual (Page 143)

GPS Reference Manual
48
Solve Localization
The user interfaces for mapping plane calibration and TDS
Localization are mostly identical. TDS Localization is simply a
calibration with a default map projection, initialized for ground
measurements, instead of a user selected map projection. This
section explains how to solve a horizontal and vertical adjustment in
either
Mapping Plane or Ground - TDS Localization mode.
Solve Localization – Control Points
6XUYH\ 3URMHFWLRQ +RUL]RQWDO 6ROYH /RFDOL]DWLRQ« 
The Solve Localization screen is used to pick control points for a least
squares localization solution, or to key in parameters for a manual
localization solution.
A list of all occupied control points matching
the current base set up group is displayed. If
a point is to be used in the horizontal and/or
vertical transformation solution, a
Yes will
appear in the H and/or V column for that
point. If it is not to be used in the solution,
that field will be blank.
Each point can be selected for horizontal or
vertical control by tapping the corresponding
column or pressing the [H], or [V] key on the
keypad. You can double tap on a point to
display information about that point.
6HOHFW + : selects the currently highlighted point for horizontal
control in the least squares solution.
6HOHFW 9 : selects the currently highlighted point for vertical control
in the least squares solution.
6HOHFW $OO : selects all of the control points to be used in the least
squares solution.
&OHDU $OO : un-selects all of the control points.