Spectra Precision Survey Pro CE v3.60 GPS User Manual - Manual (Page 86)

GPS User’s Manual
82
Procedure
1. Create a new job.
• Enter 1 as the default starting point name and accept the
default start location (5000, 5000, 100).
• Creating this job will unload the control file (since it also has
a point 1). This is what we want for our new job.
2. Set the base on your one point.
• Go to Base Setup and pick point 1.
• Choose *(7 to receive an autonomous position from the
receiver.
• Tap 6(7. At the projection prompt, tap 6ROYH 1RZ.
3. Solve a One Point Localization.
• With your base point as the one control point, tap Solve> and
Accept. At the prompt, enter a name for this Localization site
in the coordinate system database.
4. Set the rover.
5. Data collect points 2 , 3 , 4 , CHAP .
6. Move base to point CHAP.
7. Collect Check Point on 2, results should be perfect.