1 programmer key functions, Mode key, Lamp test key – Fire-Lite 411UDAC Fire Alarm Communicator User Manual

Page 31: Programmer key functions, Mode key lamp test key

Advertising
background image

411UDAC Manual — P/N 51073:E 9/20/2013

31

Normal Mode

Modes of Operation

The 411UDAC meets NFPA 72 requirements for Remote Station Protective Signaling Service and
Central Station Signaling Service reporting requirements for: (a) the type of signal, (b) condition
and (c) location of the reporting premises. See “Central Station Communications” on page 54, for
additional information.

The 411UDAC can be switched from Normal Mode to any other Mode, provided no channel pro-
grammed for fire alarm or fire supervisory is active, that is, in alarm (shorted). The PRO-411
DACT Programmer, for use with the Fire•Watch 411 Series, must be connected to the 411UDAC in
order to change from mode to mode.

3.1.1 Programmer Key Functions

MODE KEY

Pressing the MODE key followed by a valid 4-digit numerical code and the [ENTER/STORE]
key selects one of the five modes of operation. To enter Normal Mode from any other mode, press
the MODE key followed by 6676 and then [ENTER/STORE].

6676 spells NORM on a Touch-Tone

®

phone.

If an incorrect key is entered, reenter the proper 4-digit code before pressing the
[ENTER/STORE] key. Note that as information is entered into the 411UDAC, the digits will
scroll across the Programmer display from right to left.

___6
__66
_667
6676

A pause of up to 10 seconds between each number is allowed while entering the code.

LAMP TEST KEY

Pressing the Lamp Test key on the Programmer, while the digital communicator is in Normal
Mode, will cause the front panel LEDs and all segments of the four 7-segment display on the
411UDAC to light. A Lamp Test can only be performed in Normal Mode. The Lamp Test key can
also be used in Troubleshoot Mode to view the 12 volt resettable power value.

Figure 3.1 Programmer Keypad

Select operating mode

Increment memory address

Decrement memory address

One press = first memory address

Two presses = type any address

Save data, go to next address

Address entry keys are 0 to 9.
Data entry keys are 0 to 9 and A to F.

pr

41

1k

e

y.

w

mf

Advertising