Airedale SmartCool 11-233kW - Manual (Page 33)

General Features
System Configuration
Range
SN SR SD
Circuits
Single Single Dual Single Dual
General
Condensate Pump (Hot or Cold Water)*
○ ○ ○ ○ ○
Condensate Drain Tray Monitoring
○ ○ ○ ○ ○
Straight and “L” Shaped Ceiling Duct Extensions
○ ○ ○ ○ ○
Open Floorstand
○ ○ ○ ○ ○
Front and Rear Floorstands (enclosed)
○ ○ ○ ○ ○
UPS Floorstand
○ ○ ○ – –
Sterling Board LAT (Wooden Case) Packing
○ ○ ○ ○ ○
●
Standard Features
○
Optional Features
–
Feature Not Available
*
Condensate pump type depends if humidification is selected
Open & Enclosed Floorstand
Open or enclosed floor stands shall be available, complete with adjustable feet and floor tile lip. Enclosed floor stands
shall incorporate an air turning vane (SN,SR only). The height of the floor stand shall be specified at order.
Discharge Air Configuration
Standard configuration shall be downflow “draw through” design.
Straight and L shaped Ceiling Duct Extension
Straight and ‘L’ shaped duct extensions up to a height of 1350mm shall be constructed and finished to match the unit.
For extensions greater than 1350mm, please contact Airedale.
Height shall be specified at order.
Sterling Board LAT (Wooden Case) Packing
Units shall be supplied complete with additional LAT corner protection and cross braces to afford extra transit protection.
Sterling board heat treated man made material shall be used (including pallet) to comply with phytosanity import
regulations, please contact Airedale for this option).
Precision Air Conditioning SmartCool™ 6 - 200kW
33 SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
Introduction