ROTRONIC Hygrogen2 User Manual
Instruction manual, E-m-hg2-s-v2.1
Advertising
E-M-HG2-S-V2.1
Rotronic AG
Bassersdorf, Switzerland
Document code
Unit
HygroGen2: Humidity and Temperature Generator
with AutoCal/AutoCal+, Remote Control and
Range Extension options.
Instruction Manual
Instruction Manual for Software
Version 2.1
Document Type
Document title
Instruction Manual
© 2014; Rotronic AG
E-M-HG2-S-V2.1
Advertising
Table of contents
Document Outline
- 1 Scope of Document
- 2 Setting up the HygroGen2
- 3 HygroGen2 - Basic Operation
- 4 HygroGen2 Enhanced Features
- 5 General Operational Considerations
- 5.1.1 Water in the Chamber
- 5.1.2 Below Ambient Temperature Operation
- 5.1.3 Above Ambient Temperature Operation
- 5.1.4 Probe Insertion Depth
- 5.1.5 Protective filters
- 5.1.6 Low Water Level Alarm
- 5.1.7 Water Level Indicator Calibration
- 5.2 Switching off the HygroGen2
- 5.3 Preparing the Unit for Transit or Storage
- 6 HW4 Embedded
- 7 Peripherals and Settings
- 8 Servicing and Maintenance
- A1: Calibration Reference Options
- A2: Temperature Control
- B1: Validation – requirements and accessories
- B2: HygroGen2 / Screen Messages
- B3: HygroGen2 Specification
- B4: HygroGen2 Order Codes
- C1: HygroGen2 Warranty Statement
- C2: Manufacturer & Service Centre Contact Information