ROTRONIC Hygrogen2 - Manual (Page 43)

E-M-HG2-S-V2.1
Rotronic AG
Bassersdorf, Switzerland
Document code Unit
HygroGen2: Humidity and Temperature Generator
with AutoCal/AutoCal+, Remote Control and
Range Extensions options.
Instruction Manual
Instruction Manual for Software
Version 2.1
Document Type
Page 39 of 75
Document title
4.3 Remote Control
4.3.1 LAN remote
When connected to your network, as described in section 3.3.1 , and with the Remote Control Enhanced
Feature enabled, the HygroGen2 interface can be manipulated remotely using the open standard VNC
protocol and your preferred remote control device. Multiple connections to single or multiple
HygroGen2’s are supported.
Any VNC viewer/client can be used. ROTRONIC recommends RealVNC.
iOS: https://itunes.apple.com/gb/app/vnc-viewer/id352019548?mt=8
Android: https://play.google.com/store/apps/details?id=com.realvnc.viewer.android
Windows: http://www.realvnc.com/download/vnc/
Apple Mac: OS X has a built-in VNC viewer via the Finder “Go” menu and “Connect to Server”.
Your remote control device needs to be on the same Local Area Network (LAN) as your HygroGen2. Off-
site connections are possible from other networks using firewall traversal/port forwarding (port 5900)
but configuration is required on your firewall and is beyond the scope of this document. Contact your
IT support department if you wish to set this up.
Figure 29: Remote Connection
To enable Remote Connection, go to the “Settings” drop-down menu on the “Settings” screen and select
“Remote Connection”. The functionality can be toggled on or off by the “On”/”Off” button.
© 2014; Rotronic AG E-M-HG2-S-V2.1