ROTRONIC Hygrogen2 - Manual (Page 53)

E-M-HG2-S-V2.1
Rotronic AG
Bassersdorf, Switzerland
Document code Unit
HygroGen2: Humidity and Temperature Generator
with AutoCal/AutoCal+, Remote Control and
Range Extensions options.
Instruction Manual
Instruction Manual for Software
Version 2.1
Document Type
Page 49 of 75
Document title
6 HW4 Embedded
HygroGen2 comes with HW4 ROTRONIC device control software on its embedded PC. This provides
the user with access to HW4 functionality to access ROTRONIC USB devices without the need for a
separate PC.
HW4 features include:
• Psychrometric conversions
• Instrument configuration
• Data acquisition
• Measurement display and graphing
• Calibration and adjustment
HW4 does not work with other manufacturers’ USB probes.
6.1 HW4 Set Up and Getting Started
For full functionality, HW4 requires an external monitor, keyboard and mouse to be connected to the
HygroGen2 (see section 7 ). To start HW4, touch the HW4 icon. Drag the HW4 window onto a second
monitor if available.
Any ROTRONIC USB probes that are connected to the HygroGen2’s USB ports can be connected to
HW4 using the “Search for USB Masters” command. For a full overview of the use and features of
HW4, please refer to the full HW4 manual. This can be obtained from the Downloads section of
www.rotronic.com .
6.2 HW4 Installation and Registration
HW4 is preinstalled and activated during HygroGen2 manufacture. The unique HW4 serial key number
for the machine can be identified via HG Info button on the Settings screen of the HygroGen2; please
have this information available in the event that you require technical support.
To register your HW4 software and to assign your full contact details, visit www.rotronic.com and go
to the “Software” Section. Software registration will ensure that you receive full support and
notification of upgrades available.
© 2014; Rotronic AG E-M-HG2-S-V2.1