Canon VB-C60 - Manual (Page 113)

4-33
Set Normal Schedule
R
e
gi
ste
r C
a
m
e
ra
Se
rv
er
and
Set
R
e
co
rdi
ng
Sche
du
le
Configuration is discussed on the following pages.
Set the recording period
Click the hours or minutes fields to select, then click the up/down arrows or directly enter a value to change
time.
Tip
z Time period could be set for overnight recording such as [Start] 22:00 to [End] 08:00.
z Click [All Day] if you want 24 hour recording. The [Start] and [End] times will be set at 00:00 respectively.
Set start and end times and the day of the week
(
 P. 4-33).
Set frame rate, enable Motion Detection and sensor
event recording (
 P. 4-34).
Select to record audio (  P. 4-35).
Set the preset camera angle and exposure
compensation (
 P. 4-35).
Move the mouse cursor in the Preview area to change
the camera angle (
 P. 4-22).
Control the camera via the [Camera Control] Panel
(
 P. 5-39).
The Top page of the Camera Server is displayed after
Internet Explorer launches.
Set the [Night Mode], [Resolution] and [Option]
(
 P. 4-37).
Set the external device output (  P. 4-39).
* The number of external devices available for setting
depends on the type of the Camera Server.