Canon VB-C60 - Manual (Page 260)

9-18
Messages List
Adding a
Camera
Server
This camera server has already been set
up to record to the selected storage server.
Please check your settings and try again.
Even though video of a camera server is
configured to be recorded in the Storage
Server, the IP address and port used are
the same as the camera server that has
been configured in the Storage Server.
Please select a location and a zone.
An attempt was made to add a camera
server without selecting a location and
zone.
Please select a location and a zone.
<Camera number>
An attempt was made to add a camera
server without selecting a location and
zone. This is displayed when VB150 is in
the [simultaneous] mode and multiple
cameras are connected.
A camera server with the same host name
and port is currently queued for deletion.
You must save changes before adding this
camera server. After deleting the camera server, an
attempt was made to add the camera
server again when the changes have not
been saved.
The camera server host name for live
viewing is invalid. Please specify a valid
host name or IP address.
An attempt was made to connect with an
invalid host name/IP address.
The camera server port for live viewing is
invalid. Please specify a value between 1
and 65535.
An attempt was made to connect with an
invalid port number.
The camera server host name for the
storage server is invalid. Please specify a
valid host name or IP address. An attempt was made to connect to the
Storage Server with an invalid host name/IP
address.
The camera server port for the storage
server is invalid. Please specify a value
between 1 and 65535.
An attempt was made to connect to the
Storage Server with an invalid port number.
Recording
Schedule
There has been a problem modifying
schedule day '<schedule name>' for
camera '<camera name>' on storage
server '<storage server name>'. This
change may not have been reflected on the
storage server.
The destination Storage Server was not
found when you attempted to save the
schedule.
There has been a problem deleting
schedule day '<schedule name>' from
camera '<camera name>' on storage
server '<storage server name>'. This
change may not have been reflected on the
storage server.
The destination Storage Server was not
found when you attempted to delete the
schedule.
There has been a problem retrieving
schedules from storage server '<storage
server name>'.
The Storage Server in which the schedule
is to be saved was not found when you
attempted to display the [Recording
Schedules] window or to switch the
Storage Server.
Messages Cause