Canon VB-C60 - Manual (Page 257)

9-15
Messages List
T
rou
b
les
ho
oti
n
g
Viewer Warning Messages
Messages Cause
Add
Recording
Schedule
The audio transmission function of the
camera is not available.
Please confirm the camera settings.
The audio transmission function of the
camera is disabled.
A setup of the stream for recording is
applied only to the JPEG recording not
more than maximum frame rate 10fps.
It is applied to neither JPEG recording of 10
or more fps nor MPEG-4 recording.
You attempted to apply video recording
stream settings to high rate JPEG video or
MPEG-4 video.
MPEG-4 recording with Preset Tour could
consume disk space rapidly.
Do you wish to continue?
The data volume of MPEG-4 video
becomes several times bigger if the video
contains a lot of motion of subjects. You
need attention when using Preset Tour
together with MPEG-4 recording, as a
whole image moves during Preset Tour.
Preset Tour
Settings
Attention:
The current Preset Tour settings might
require you to repair the Pan/Tilt machine
soon.
Please note that the repair of consumable
mechanical parts such as the Pan/Tilt
machine may not be covered by the
guarantee.
Recommended Preset Tour settings to
reduce the machine load:
z Change the Preset Tour duration within
<hh> : <nn> at the [Start Time] and [End
Time] setting.
z Adjust the Preset Tour configuration so
that the total amount of camera
movement (angle/time) becomes small.
z Set the pause time to the preset position
longer than the Pause (sec) setting.
Click the [Cancel] button to return to the
setting screen.
The configured settings exceed the
endurance limit of 100,000 pans and tilts
(300,000 for the VB-C60) within one year on
the VB-C50i or VB-C300.