Canon VB-C60 - Manual (Page 237)

8-3
Sys
tem
M
a
in
ten
anc
e
Upgrade VK-64/VK-16
This section describes how to upgrade previous versions of VK-64/VK-16.
Upgrade from Version1.0
1. Obtain the released version of v2.2 (you cannot use the upgrade program).
2. Back up the following folders that are in the Storage Server of v1.0.
<Installation folder for VK-64> \NVR\1.0\conf
<<Example>> C:\Program Files\Canon\Webview\NVR\1.0\conf
<All drives>:\WebView-NVR
Please note that the capacity of this folder is large.
3. Install the new version.
If a failure occurs, restore the previous version by following "Procedure for Restoring Previous Version" (
 P.
8-6).
Upgrade from v1.1, 1.2, 1.3, 1.4, 2.0 and 2.1
1. Obtain the v2.2 upgrade program (free program).
Available from Canon Web site.
2. Back up the following folders that are in the Storage Servers of v1.1, v1.2, v1.3, v1.4, v2.0 and v2.1.
Configuration file path for OS other than Windows Vista/Windows Server 2008
<Startup drive for OS>:\Documents and Settings\All Users\Application Data\
Canon\Webview\NVR
<All drives>:\WebView-NVR
Configuration file path for Windows Vista/Windows Server 2008
<Startup drive for OS>:\ProgramData\Canon\WebView\NVR\
<All drives >:\WebView-NVR
3. Install the new version by following the upgrade procedure described at our WebView Product web page.
If a failure occurs, restore the previous version by following "Procedure for Restoring Previous Version" (  P.
8-6).
Note
z When upgrading your PC to Windows Vista or Windows Server 2008, first upgrade the software to v2.2
before upgrading to Windows Vista or Windows Server 2008.
z If you are using VK-64/VK-16 with NAS server, you need to set up log-on settings again after upgrading
VK from v1.3, v1.4, v2.0 and v2.1 to v2.2.