Canon VB-C60 - Manual (Page 156)

5-6
Start the Viewer
„ How to Launch
Before launching the Viewer, make sure your monitor resolution is set to 1024 x 768 pixels or more.
Start the Viewer
To start the VK-Lite Viewer, double-click [VK-Lite Viewer v2.2] on the desktop.
Or, from the Windows [Start] menu, click [Programs] > [WebView Livescope] > [Network Video Recorder
VK-Lite v2.2] > [VK-Lite Viewer v2.2].
To start the VK-64/VK-16 viewer, double click [VK Viewer v2.2] on the desktop.
Or, from the Windows [Start] menu, click [Programs] > [WebView Livescope] > [Network Video Recorder VK
Series v2.2] > [VK Viewer v2.2].
The connect option menu for Storage Server appears. Select the [Master Storage Server] option and click
[Connect].
Start-up Screen
Note
To start the Viewer, you need the user name and password set for the VK-64/VK-16 Storage Server.
Tip
A connection error may occur when the Master Storage Server is not operating.
[localhost]
Connects to Storage Server and launches Viewer. Select this
option to use the local PC where Viewer is installed as Master
Storage Server.
[Use IP address]
Connects to Storage Server and launches the Viewer by
specifying its IP address. Select this option when Storage
Server and the Viewer are installed on separate PCs.
[Not use Storage Server]
Select this option to use Viewer only without connecting to
Storage Server.