Canon VB-C60 - Manual (Page 158)

5-8
Start the Viewer
4. Click [Connect].
5. Enter your [User Name] and [Password], and click [Login].
„ Launch without Storage Server (Viewer Only Mode)
You can use the Viewer only without connecting to a Storage Server. When Storage Server is not used, some
functions are not available.
Use Viewer only
1. Select [Not use Storage Server] from the drop-down menu.
2. Click [Connect].
Note
z If you need to use proxy server, you need to change the Internet option settings in the following
procedure:
1. Select [Start] > [Control Panel] > [Internet Options].
2. Select the [Connections] tab.
3. Click [LAN settings].
Change the proxy server settings.
z If using proxy server between Viewer and Storage Server, it should not perform response buffering.
Proxies which are configured to perform response buffering may lead to delays in sending small amounts
of data (such as events) from the Storage Server to the Viewer. Apache proxy server does perform
response buffering so is not recommended.
z You cannot transmit or receive audio when using proxy server.