Canon VB-C60 - Manual (Page 126)

4-46
Set Motion Detection Recording
Set Motion Detection Recording Settings
The Motion Detection recording starts when a motion has been detected.
Configure the Motion Detection recording settings in the [Motion Detection Settings] window which appears
when you click [Settings].
Some items in the [Motion Detection Settings] window overlap with the items in the [Add Schedule Item] and
[Edit Schedule Item] dialog. In Motion Detection recording, the settings in the [Motion Detection Settings]
window take precedence. [Preset] and [Exposure Compensation] settings in the [Add Schedule Item] and [Edit
Schedule Item] dialog are applied to the Motion Detection recording.
Note
z The Motion Detection function is not suitable for conditions where high reliability is required. It is not
recommend using this function in situations where high reliability is required, such as for monitoring
purposes. Canon accepts no liability whatsoever for faults, etc. resulting from the use of the Motion
Detection.
z Motion detection is performed by the Storage Server or Camera Server (whichever selected in the [Motion
Detection Settings] window). If the Camera Server executes motion detection, motion detection is not
available while the Camera Server is performing the pan, tilt, or zoom operation (motion detection by the
Storage Server is available during these operations).
z If the recording schedule expires during Motion Detection recording, the Motion Detection recording also
terminates.