Canon VB-C60 - Manual (Page 76)

3-24
Set the [Event Notification] Tab
3. Enter the host name or IP address of the [SMTP server] in SMTP Server and port number in [Port].
4. If you wan to use POP-before-SMTP for user authentication, check the [Enable authentication (POP-before-
SMTP)] option, and enter the user name used for authentication in [User Name] and password in
[Password]. Also, enter the host name or IP address of the POP server in [POP Server] and port number in
[Port].
Example event notification e-mail
An event of priority 3 occurred on 12/05/2006 at 15:15:17 +1000.
Parking Lot 1: Sensor on
Tip
You can only register one e-mail address in the [To Address] field.
If you want to send the e-mail to multiple addresses, use a group address.
Note
Enter the host name in up to 255 characters.
Note
z Enter the user name in up to 100 characters.
z Enter the password in up to 20 characters.
z Enter the host name in up to 255 characters.
Tip
If this function is enabled, the Storage Server will attempt to perform a POP login before sending e-mail that
may be required for some SMTP servers.