Canon VB-C60 - Manual (Page 85)

4-5
Launch VK Viewer and Display the [Configuration and Preferences] Screen
R
e
gi
ste
r C
a
m
e
ra
Se
rv
er
and
Set
R
e
co
rdi
ng
Sche
du
le
Launch Storage Server by Specifying the IP address
If you installed the Viewer and Storage Server on separate PC, specify an IP address of Storage Server and
connect Viewer to the Storage Server.
1. Select [Use IP address] from the drop-down menu.
2. Click [Connect].
3. Enter the IP address or host name of the Master Storage Server in [Host Name or IP], and the port number
in [Port].
4. Click [Connect].
5. Enter your [User Name] and [Password], and then click [Login].
Note
z If you use a proxy server, you should change the Internet option settings in the following procedure:
1. Select [Start] > [Control Panel] > [Network and Internet] > [Internet Options].
2. Select the Connection tab.
3. Click LAN settings.
Change the proxy server settings.
z If using a proxy server between a Viewer and a Storage Server, it should not perform response buffering.
The Proxy Server which is configured to perform response buffering may lead to delays in sending small
amounts of data (such as events) from the Storage Server to the Viewer. You cannot use the Apache
proxy server since it perform response buffering.
z You cannot send or receive audio when using a proxy server.