Canon VB-C60 - Manual (Page 266)

9-24
Messages List
Layout
Sequence
dialog
Shared layout sequences may not contain
personal layouts. The following layouts
must be removed before the layout can be
saved as a shared layout sequence :
An attempt was made to change the layout
sequence that contains a personal layout
sequence to a shared layout sequence.
Motion
Detection
Settings dialog
The analysis frame rate must be between
'<fps>' and '<fps>'. An invalid value was selected for the
motion detection frame rate.
The recording frame rate must be between
'<fps>' and '<fps>' An invalid value was selected for the
motion detection recording frame rate.
The pre-event time must be no greater than
30.
[OK] was pressed after configuring a value
exceeding 30 seconds for the pre-event
time value.
Normal or
Special Day
Schedule
window and
Add/Edit
Camera
Server dialog
Recording settings for camera servers on
the storage server '<storage server name>'
will not be available.
<Communication Error Messages -
Details>
An error occurred while connecting to the
Storage Server, when the Normal or Special
Day Schedule window is opened or the
Storage Server in the Recording Schedules
window is changed. Or, a communication
error occurred when you were adding/
editing a Storage Server.
Organize
Layouts &
Layout
Sequences
dialog
This will replace the current layout. Are you
sure?
There is a layout with the same name in the
destination to which the layout is moved
and the name is the same as the layout that
is being currently used.
You cannot delete
'<layout name>'
because it is the current layout or it
contains the current layout or layout
sequence.
An attempt was made to delete the current
layout or the folder that contains the current
layout or layout sequence.
Are you sure you want to delete the
selected layout?
<layout name>
An attempt was made to delete a layout
that is not currently being used.
Are you sure you want to delete the
selected folder, including layouts and
layout sequences within the folder?
<layout name>
An attempt was made to delete the layout
folder.
Are you sure you want to delete the
selected layout sequence? An attempt was made to delete the layout
sequence.
You cannot delete
'<layout name>'
because it is the current layout sequence. An attempt was made to delete a layout
that is registered in the current layout
sequence.
You cannot overwrite
'<layout name> '
because it is used by the current layout
sequence.
An attempt was made to change or
overwrite the layout that is being used in
the currently active layout sequence.
Messages Cause