Canon VB-C60 - Manual (Page 274)

9-32
Messages List
SMTP Error Codes
HTTP Error Codes
10091
WSAStartup cannot function at this time
because the underlying system it uses to
provide network services is currently
unavailable.
There is a failure on the PC network board.
11001 No such host is known. The host name in DNS could not be resolved.
11004
The requested name is valid, but no data of the
requested type was found. The host name in DNS could not be resolved
(11004 may occur instead of 11001 in 2003).
Codes Error Messages Description
421
<domain> Service not available, closing
transmission channel The communication is terminated because the
mail server stopped.
450
Requested mail action not taken: mailbox
unavailable The requested mail process was not executed
because the mailbox is not available.
451
Requested action aborted: local error in
processing The requested execution was canceled
because an error occurred in the mail server.
502 Command not implemented
The mail server does not support the
command that was sent.
550
Requested action not taken: mailbox
unavailable The request was not executed because the
mailbox is not available.
Codes Error Messages Description
400 Bad Request
When more than 4 Storage Servers are
connected when a Sony camera is used. This
is recorded when the operation mode of the
camera server is mpeg4.
401 Unauthorized
The user authentication or password for
connecting to the camera server is incorrect.
403 Forbidden
This is recorded when the connection cannot
be established due to the IP address
restriction on the camera server side (It may
also be returned by the proxy server).
500 Internal Server Error
This occurs when the webview server is not
running even when the HTTP server is running.
This may also be recorded even during normal
operation if the camera server is restarted.
502 Bad Gateway
This is recorded when the proxy server
returned an HTTP 502 error (which occurs
when the proxy server receives an error from
the upper proxy).
Codes Error Messages Description