Canon VB-C60 - Manual (Page 65)

3-13
Set the [Settings] Tab
Sto
rage
Ser
v
er C
o
n
fig
ur
ati
on
R
e
fe
renc
e
To remove a network drive
1. Click [Delete Network Drive].
2. Select a network drive and click [OK] to delete the selected drive from the Storage Server.
Note
z About Network Drive
VK-64/VK-16 can record videos on a drive on the network. The drive type is shown at the head of the
[Drive] drop-down menu as "Internal disk: [local], Network drive: [network]".
z About Video Recording Operation
If disk space is not enough to cover the specified value configured with [Maximum disk space used], the
retained duration of recorded video may be shorter than the specified period or the recording may be
temporarily stopped. Please be sure to perform sufficient tests before starting operations.
z For details about disk space management on the Storage Server, see "Important: Disk Space
Management" (  P. 3-17).
z Windows does not allow a user who has logged in with a [local system account] (used for normal service
management) to add a network drive. The [Add network drive] and [Delete network drive] items are
disabled while you are logging into Windows with a [local system account]. To set the network drive, click
[Stop Storage Server] to stop the Storage Server, and click the [Logon settings] and switch to an account
which is allowed to use the network drive (i.e., account with Windows' Administrator and [Logon As
Service] privileges). see "[Logon As Service] Privilege" (
 P. 3-15).
z You cannot use a UNC path or removable disk when adding a network drive.
z If you add or delete a network drive, the Storage Server program will reboot.
z Multiple Storage Servers cannot use the same network drive simultaneously.
z Single network drive cannot allocate to multiple drivers.
z If the selected network drive cannot be accessed because the network is disconnected, the selected
drive is powered off, or you entered a wrong path, the following error message will appear.
"Network path cannot be found."
z While the network drive is not operating (e.g., due to network disconnection), video will not be recorded
until the drive recovers.
z If a storage server is booted when the storage server is unable to connect to a NAS server, video image
data won't be written to or recorded data won't be read from NAS server even after the NAS server
recovers. In such case, reboot the storage server.