Canon VB-C60 - Manual (Page 163)

5-13
Vie
w
er R
e
fe
re
nc
e
Viewer Setting
[Viewer Settings] window
The [Viewer Settings] window is used for settings such as notification priorities and the live viewing frame rate.
Settings are stored on the Viewer PC, not on the Master Storage Server.
The [Viewer Settings] screen is divided into tabs for administrators and guest users depending on the settings.
The [Viewer Settings (Admin)] tab is displayed only when the user logs in as an Administrator. Each of these
tabs consists of the following settings.
[Viewer Settings (Admin)] tab
• [Master Storage Server] - You can switch to display or not to display the Master Storage Server option
window (connection menu) on start-up, and also add/delete Master Storage Server into/from the
connect menu.
• [Layout setting] - Confirm if the layout was preserved when quitting or when the screen changes.
• [Video Window Popup Setting] - Enables you to set whether video is displayed at the same time as
events occur.
• [Event Notification Settings] - Set operator notification and adjust duration in seconds, set operator
acknowledgement (recognition) of an event, set an audio alert, and suppress event display.
[Viewer Settings] tab
• [Video Viewing Settings] - Select the maximum viewing frame rate for live videos.
• [Proxy Setting] - Use this option to make an access to Storage Server via proxy server.
• [Audio Setting] - Set automatic termination of audio transmission after a specified period of time.
• [Focus Operation Setting] - Set the focus position to return to the default setting of the camera when
operating the camera.
• [Still Frame Capture Setting] - Enables you to configure the date and time to be additionally displayed
on still frames.
Note
Be sure to perform the operational tests after setting the viewer.
Click Viewer Settings (Admin) or
Viewer Settings (Operators).