Canon VB-C60 - Manual (Page 94)

4-14
Add Storage Server
If you are using multiple Storage Servers, add each Storage Server as directed below. You need not perform
these steps if you are using only one Storage Server and that Storage Server has already been added.
By adding the Storage Server, you can select the Camera Servers managed by each Storage Server from the
Viewer screen.
Display [Storage and Camera Server Summary] Windows
Launch the VK Viewer and display the [Storage and Camera Server Summary] window.
Add Storage Server
1. In the [Storage and Camera Server Summary], select the [Storage Servers] tab.
2. Click [Add Storage Server] to bring up the [Add Storage Server] dialog.
3. Enter connection settings and click [OK].
Note
If you are using the Viewer only, the [Storage Servers] tab is not shown and you cannot add the Storage
Server.
Tip
You can operate VK-64 with up to 10 Storage Servers, and up to 192 Camera Servers can be operated.
Note
z Do not add the same Storage Server more than once.
z If you add a Storage Server with a different configuration (such as one managed by another Master
Storage Server), your original Locations and Zones will be invalid.
z You need to change Windows settings of a storage server to be added before if you are using Windows
XP SP2 or Windows Server 2003. See "Notes on Operating Environment" (
 P. 1-12~P. 1-16).
z Do not change the port number.