Rack view – HP Integrated Lights-Out User Manual
Page 124
Using iLO 2 124
The server blade must be properly cabled for iLO 2 connectivity. Connect to the server blade with one of
the following methods:
•
Through an existing network (in the rack)—This method requires you to install the server blade in its
enclosure and assign it an IP address manually or using DHCP.
•
Through the server blade I/O port
o
In the rack—This method requires you to connect the local I/O cable to the I/O port and a client
PC. Using the static IP address listed on the I/O cable label and the initial access information on
the front of the server blade, you can access the server blade with the iLO 2 Advanced Remote
Console.
o
Out of the rack, with the diagnostic station—This method requires you to power the server blade
with the optional diagnostic station and connect to an external computer using the static IP
address and the local I/O cable. For cabling instructions, refer to the documentation that ships
with the diagnostic station or to the Documentation CD.
o
Through the server blade rear panel connectors (out of the rack, with the diagnostic station)—This
method enables you to configure a server blade out of the rack by powering the blade with the
diagnostic station and connecting to an existing network through a hub. The IP address is
assigned by a DHCP server on a network.
The BL p-Class tab enables you to control specific settings for the ProLiant BL p-Class blade server rack.
iLO 2 also provides Web-based status for the ProLiant BL p-Class server rack.
Rack View
The Rack View page presents an overview of all the enclosures and their contained blade servers,
network components, and power supplies. A component, when present in the rack is displayed and a
selectable component on the Rack View page. Blank or empty bays are not selectable. Component-
specific information, such as blade name, IP address, and product type, is displayed as you move the
mouse cursor over each component. Clicking the component displays additional information and
configuration options in the adjacent screen.
The following fields are available on the Rack View screen: