HP Integrated Lights-Out - Manual (Page 33)

Configuring iLO 2 33
Parameter Default value Description
Telnet Access Disabled This setting enables you to connect a telnet client to the
Remote Console/Telnet port, providing access to the iLO 2
CLP. The following settings are valid:
• Enabled—iLO 2 enables telnet clients to connect to the
Remote Console/Telnet port. Network port scanners can
detect that iLO 2 is listening on this port. Unencrypted
communication is allowed between the iLO 2 CLP and
telnet clients.
• Disabled—iLO 2 does not allow telnet clients to connect
to the Remote Console/Telnet port. Network port
scanners will not normally detect if this port is open on
iLO 2. iLO 2 listens on this port for a few seconds when
the Remote Console is opened, but telnet connections are
not accepted.
Communication between the iLO 2 and Remote Console is
always encrypted.
Remote
Console/Telnet Port
23 This setting enables you to specify which port the iLO 2
Remote Console uses for remote console communications.
Web Server Non-SSL
Port 80 This setting enables you to specify which port the embedded
web server in iLO 2 uses for unencrypted communications.