HP Integrated Lights-Out - Manual (Page 213)

Troubleshooting iLO 2 213
The HP Insight Management Agents 5.40 and later have the ability to reset iLO 2. To reset iLO 2, choose
one of the following options:
• Select the Reset iLO 2 option on the HP Management Agent web page under the iLO 2 section.
• Click Apply on the Network Settings page to manually force the iLO 2 management processor to
reset. You do not need to change any parameters before clicking Apply.
• Click Reset on the Diagnostic page of the iLO 2 browser interface.
Server name still present after ERASE utility is executed
The Server Name field is communicated to iLO 2 through the Insight Manager Agents.
To remove the Server Name field after a redeployment of a server, do one of the following:
• Load the Insight Manager Agents to update the Server Name field with the new server name.
• Use the Reset to Factory Defaults feature of the iLO 2 RBSU utility to clear the Server Name field.
This procedure clears all iLO 2 configuration information, not just the Server Name information.
• Change the server name on the Administration>Access>Options page on the iLO 2 browser
interface.
Troubleshooting a remote host
Troubleshooting a remote host server might require restarting the remote system. You can restart the
remote host server by using the options listed in the Virtual Devices tab.