User login using directory services – HP Integrated Lights-Out User Manual
Page 165
Directory services 165
•
Remote Console—This option allows the user access to the Remote Console.
•
Virtual Media—This option allows the user access to the iLO 2 Virtual Floppy and Virtual Media
functionality.
•
Server Reset and Power—This option allows the user to remotely reset the server or power it down.
•
Administer Local User Accounts—This option allows the user to administer accounts. The user can
modify their account settings, modify other user account settings, add users, and delete users.
•
Administer Local Device Settings—This option allows the user to configure iLO 2 settings. These
settings include the options available on the Global Settings, Network Settings, SNMP Settings, and
Directory Settings screens of the iLO 2 browser.
User login using directory services
The iLO 2 login page Login Name field accepts all of the following:
•
Directory users
•
LDAP Fully Distinguished Names
Example: CN=John Smith,CN=Users,DC=HP,DC=COM, or @HP.com
NOTE:
The short form of the login name by itself does not tell the directory which domain you
are trying to access. You must provide the domain name or use the LDAP distinguished name
of your account.
•
DOMAIN\user name form (Active Directory Only)
Example: HP\jsmith
•
username@domain form (Active Directory Only)
Example: [email protected]
NOTE:
Directory users specified using the @ searchable form may be located in one of three
searchable contexts, which are configured within Directory Settings.
•
User name form
Example: John Smith
NOTE:
Directory users specified using the user name form may be located in one of three
searchable contexts, which are configured within Directory Settings.
•
Local users—Login-ID
NOTE:
On the iLO 2 login page, the maximum length of the login name is 39 characters for
local users. For Directory Services users, the maximum length of the login name is 256
characters.