Linux device driver support, Novell netware device driver support – HP Integrated Lights-Out User Manual
Page 21
iLO 2 setup 21
•
CPQASM2.SYS, SYSMGMT.SYS, and SYSDOWN.SYS provide the iLO 2 Advanced Server
Management Controller Driver support.
PSP for Microsoft® Windows® products includes an installer that analyzes system requirements and
installs all drivers. The PSP is available on the HP website
or on the
SmartStart CD.
To install the drivers in the PSP:
1.
Download the PSP from the HP website
2.
Run the SETUP.EXE file included in the download, and follow the installation instructions.
For additional information about the PSP installation, read the text file included in the PSP download.
Linux device driver support
You can download the LSP files containing the iLO 2 driver, the foundation agents, and health agents
from the HP website
. The instructions on how to install or update the iLO 2
driver are available on the website. The HP Management Agents for Linux are:
•
ASM package (hp-snmp-agents) combines the health driver, IML viewer, foundation agents, health
agent, and standard equipment agent into one package.
•
RSM package (hp-iLO) combines the RIB driver, rack daemon, RIB agent, and rack agent into one
package.
To load the health and iLO 2 driver packages, use the following commands:
rpm –ivh hp-snmp-agents-d.vv.v-pp.Linux_version.i386.rpm
rpm –ivh hp-iLO-d.vv.v-pp.Linux_version.i386.rpm
where d is the Linux distribution and version and
vv.v-pp are version numbers.
For additional information, see the Software and Drivers website
To remove the health and iLO 2 drivers, use the following commands:
rpm –e hp-snmp-agents
rpm –e hp-iLO
For additional information, see the Software and Drivers website
Novell NetWare device driver support
The device drivers required to support iLO 2 are part of the PSP that is located on the SmartStart CD and
the HP website
. The PSP for Novell NetWare includes an installer that
analyzes system requirements and installs all drivers.
iLO 2 requires the following files:
•
The CPQHLTH.NLM file provides the Health Driver for Novell NetWare.
•
The CPQCI.NLM file provides iLO 2 Management Interface Driver support.
When updating iLO 2 drivers, be sure iLO 2 is running the latest version of iLO 2 firmware. You can
obtain the latest version as a Smart Component from the HP website